First, confirm you are on the right form. DA Form 7215 carries the official title RELEASE/CONSENT STATEMENT, and you use it to release/consent statement. Second, check the edition: the copy offered here is dated 01/01/2026 and its publication status is ACTIVE. Third, size up the job — 1 page(s) and about 45 entry fields, so you can decide whether to fill it now or set aside time. One thing to settle first: a later edition has been issued. Reach for this one only when you are working with a record already executed on it.
Next, find out whether you are the one who fills it. In most cases you complete the entries yourself, and an administrator in your unit reviews what you wrote before it moves on. If you are the administrator, you will be working from what the individual gives you. Either way, G-1 owns the form and AR 608-18 tells you when to raise it and where it goes afterward, so read the directive first if your situation is not routine.
Begin with the first block and follow the printed order. You will enter your name first, exactly as your official records show it, followed by your identification number, your organisation, and the date of preparation. Resist the urge to jump to the substantive blocks and return to the header later. Those first entries are the index for the whole record, and an error there costs you the ability to retrieve it.
In the body of the form, tab from field to field instead of clicking around. The tab order follows how the form was constructed, which keeps you from missing a box. For check boxes and option buttons, click them. If you find a set where the choices are exclusive, expect your new selection to clear the previous one. Keep an eye on long entries as you type: fields built for one line will not wrap, and what overflows the width will print truncated even though your screen shows all of it. At that point move the text into remarks or onto a continuation. And when something does not apply to you, say so in the field — write the entry that means "none" rather than leaving white space a reviewer has to interpret.
Sign at the end and not before. Use ink or the electronic method your office accepts; whatever the state of the entries, an unsigned form is still a draft. When a reviewer, approver or witness has to sign as well, collect those signatures in printed block order and make sure each one is dated the day it was applied, not the day you started. Then read the form through once from the beginning. Three faults account for most rejections: a required field left blank, an identification number with two digits swapped, and a date whose day and month are reversed. Add a fourth if you began from an old working copy — data left over from the last time will travel forward untouched.
Read the Privacy Act statement when it appears on the page, before you fill in the personal details it covers. It sets out the authority for collecting the information, the purpose behind it, the routine uses it may be put to, and whether your disclosure is required or voluntary. Then keep in mind what you have created — a completed copy carries personal data, and you handle and store it under the rules that apply to such records.
Download the form
Next comes the download itself. The formats available are PDF, XFDL, and you decide between them by asking how you will enter the information. If you plan to type, take the fillable pdf: the boxes accept keyboard input and you can save the result. If you plan to write by hand, take the printable pdf and run it through your printer while it is still blank. Both show the same published page, so the decision affects your method and nothing else.
After you download, open the file the right way. Double-click a pdf and your browser may take it, which is fine for reading but risky for filling: some browser viewers show you the fields, let you type, and then lose the text when you close the tab. Save the file to your computer first, then open it in a full pdf reader, and check that your entries survive a save before you type the whole form. If you downloaded the xfdl file, do not try a pdf reader on it. That format is IBM Lotus Forms, and you need the Lotus Forms Viewer to open it at all.
Finally, note what the download costs you: nothing. You do not create an account, you do not enter an email address, and the file you receive is the published document with nothing added to it.
What the form asks for
- ContentArea1
- Date
- Name
- Page1
- ReqAgency
- Signature
- T10
- T11
- T12
- T13
- T14
- T15
- T17
- T18
- T19
- T20
- T21
- T22
- T23
- T24
- T25
- T26
- T29
- T30
Once you have signed, route the form. The prescribing directive names the destination: an office, your unit administrative channel, or your personal file, according to the case. Make yourself a copy first, because you will not get the original back. After that, retention is out of your hands — the applicable records schedule fixes how long the document is kept, whatever the practice in a particular office.
If you find you need a second form to go with this one, look by series and number. Forms in the DA series that share a proponent or a prescribing directive are often used together, and any form named on the face of this one normally goes forward with it. Gather continuation sheets, cover sheets and transmittal documents before you submit, not after somebody asks for them.
The next time you open this form from your own files, check the edition date first. Revisions come from the proponent without warning to you, so the only reliable step is to hold your copy against the current edition before filling it in again. Records you already completed under a superseded edition stand, and you do not go back to rework them.
One last thing to be clear about before you download. What you get here is a copy of a published Department of the Army document. This site is not part of the Department of the Army, issues no forms of its own, and cannot tell you that any office will accept what you submit. Nothing written on this page is legal advice. When you are unsure about a particular entry, a requirement or whether you are eligible at all, ask G-1 or the administrative office that services your unit — they answer those questions and we do not.
Questions and answers
- What is DA Form 7215?
- RELEASE/CONSENT STATEMENT
- Which edition is current?
- 01/01/2026
- Who is responsible for this form?
- G-1
- In which formats can it be downloaded?
- PDF, XFDL, PDF
Publisher notes
- PRIVACY ACT STATEMENT