Begin by matching the form to your task. DA Form 5450-R is titled MOISTURE AND DENSITY FIELD TEST SHEET (LRA), and you reach for it when you need to moisture and density field test sheet (lra). Once that matches, check the date. The edition here is 08/01/1985, published with the status ACTIVE. After that, glance at the length: you will be working through 1 page(s) and somewhere near 200 fields.
Next, find out whether you are the one who fills it. In most cases you complete the entries yourself, and an administrator in your unit reviews what you wrote before it moves on. If you are the administrator, you will be working from what the individual gives you. Either way, AMC owns the form and TM 5-6635-386-12 & P tells you when to raise it and where it goes afterward, so read the directive first if your situation is not routine.
Begin with the first block and follow the printed order. You will enter your name first, exactly as your official records show it, followed by your identification number, your organisation, and the date of preparation. Resist the urge to jump to the substantive blocks and return to the header later. Those first entries are the index for the whole record, and an error there costs you the ability to retrieve it.
Once you reach the body of the form, move between fields with the tab key rather than the mouse; it follows the order the form was built in and you are less likely to skip a box. Click check boxes and option buttons directly. When you meet a group of options where only one can apply, notice that selecting a second one clears the first — that is intended, not a fault. Watch your longer answers as you type them. A single-line field does not wrap, so text that runs past the edge stays visible on screen and then prints cut off. When you see that happening, stop and move the text to the remarks area or a continuation instead of squeezing it in. If a field does not apply to you, mark it rather than leaving it empty; a blank space tells the reviewer nothing about whether you considered the question or missed it.
Sign at the end and not before. Use ink or the electronic method your office accepts; whatever the state of the entries, an unsigned form is still a draft. When a reviewer, approver or witness has to sign as well, collect those signatures in printed block order and make sure each one is dated the day it was applied, not the day you started. Then read the form through once from the beginning. Three faults account for most rejections: a required field left blank, an identification number with two digits swapped, and a date whose day and month are reversed. Add a fourth if you began from an old working copy — data left over from the last time will travel forward untouched.
At some point while filling the form you will meet a Privacy Act statement, and you should read it when you reach it rather than after you finish. It tells you who is authorised to collect the information, what it will be used for, who else may see it, and whether you are obliged to answer or may decline. Once you have entered your details, treat the file accordingly: it now holds personal information about you, so store it and send it the way your office handles such records.
Download the form
Next comes the download itself. The formats available are PDF, XFDL, and you decide between them by asking how you will enter the information. If you plan to type, take the fillable pdf: the boxes accept keyboard input and you can save the result. If you plan to write by hand, take the printable pdf and run it through your printer while it is still blank. Both show the same published page, so the decision affects your method and nothing else.
Once the file is on your machine, open it deliberately. A pdf will usually launch in your browser, which reads well enough but does not always hold what you type; certain viewers display the fields and then discard your entries. Save the download to a folder, open it from there in a dedicated reader, and test one field and one save before you commit to filling the whole thing. If the xfdl file is what you need, install the IBM Lotus Forms Viewer first. No pdf reader and no word processor will open it.
One last point before you move on: every format is free. No registration stands between you and the file, and what you download is the published form, unaltered.
What the form asks for
- ADENS_A
- ADENS_B
- ADENS_C
- ADENS_D
- ADENS_E
- ADENS_F
- ADENS_G
- ADENS_H
- ADENS_I
- ADENS_J
- ADENS_K
- ADENS_L
- ADENS_M
- ADENS_N
- ADENS_O
- AMOIS_A
- AMOIS_B
- AMOIS_C
- AMOIS_D
- AMOIS_E
- AMOIS_F
- AMOIS_G
- AMOIS_H
- AMOIS_I
Once you have signed, route the form. The prescribing directive names the destination: an office, your unit administrative channel, or your personal file, according to the case. Make yourself a copy first, because you will not get the original back. After that, retention is out of your hands — the applicable records schedule fixes how long the document is kept, whatever the practice in a particular office.
If you find you need a second form to go with this one, look by series and number. Forms in the DA series that share a proponent or a prescribing directive are often used together, and any form named on the face of this one normally goes forward with it. Gather continuation sheets, cover sheets and transmittal documents before you submit, not after somebody asks for them.
Before you reuse a saved copy, look at the edition date printed on it. The proponent revises the form from time to time, and your stored file will not tell you when that happens — you compare its date against the current edition yourself. If a revision has come out since you last filed one of these, leave the earlier submission alone; the change does not reach backwards.
Read this before you go. The file you download is a reproduction of a published Department of the Army document, offered as it was published. We are an independent site with no connection to the Department of the Army and no authority to issue anything, and we make no statement about whether your completed form will be accepted anywhere. Treat what you read here as information, not legal advice. Take real questions — about an entry, a requirement, or your eligibility — to AMC or to your servicing administrative office.
Questions and answers
- What is DA Form 5450-R?
- MOISTURE AND DENSITY FIELD TEST SHEET (LRA)
- Which edition is current?
- 08/01/1985
- Who is responsible for this form?
- AMC
- In which formats can it be downloaded?
- PDF, XFDL, PDF
Publisher notes
- 41-ITEM ALSO PRODUCED IN ELECTRONIC MEDIA,