First, confirm you are on the right form. DA Form 2408-14 carries the official title UNCORRECTED FAULT RECORD, and you use it to uncorrected fault record. Second, check the edition: the copy offered here is dated 08/01/2026 and its publication status is ACTIVE. Third, size up the job — 2 page(s) and about 200 entry fields, so you can decide whether to fill it now or set aside time. One thing to settle first: a later edition has been issued. Reach for this one only when you are working with a record already executed on it.
Then work out your role. If the entries describe you, you fill them in and someone in the administrative section checks the result. If you handle records for others, you enter what they supply and pass the form along. In both cases the same two references govern you: G-4 maintains the form, and PAM 750-1 sets out the trigger for using it and the route it takes. Read that directive before you start when anything about your case is unusual.
Begin with the first block and follow the printed order. You will enter your name first, exactly as your official records show it, followed by your identification number, your organisation, and the date of preparation. Resist the urge to jump to the substantive blocks and return to the header later. Those first entries are the index for the whole record, and an error there costs you the ability to retrieve it.
In the body of the form, tab from field to field instead of clicking around. The tab order follows how the form was constructed, which keeps you from missing a box. For check boxes and option buttons, click them. If you find a set where the choices are exclusive, expect your new selection to clear the previous one. Keep an eye on long entries as you type: fields built for one line will not wrap, and what overflows the width will print truncated even though your screen shows all of it. At that point move the text into remarks or onto a continuation. And when something does not apply to you, say so in the field — write the entry that means "none" rather than leaving white space a reviewer has to interpret.
Sign at the end and not before. Use ink or the electronic method your office accepts; whatever the state of the entries, an unsigned form is still a draft. When a reviewer, approver or witness has to sign as well, collect those signatures in printed block order and make sure each one is dated the day it was applied, not the day you started. Then read the form through once from the beginning. Three faults account for most rejections: a required field left blank, an identification number with two digits swapped, and a date whose day and month are reversed. Add a fourth if you began from an old working copy — data left over from the last time will travel forward untouched.
At some point while filling the form you will meet a Privacy Act statement, and you should read it when you reach it rather than after you finish. It tells you who is authorised to collect the information, what it will be used for, who else may see it, and whether you are obliged to answer or may decline. Once you have entered your details, treat the file accordingly: it now holds personal information about you, so store it and send it the way your office handles such records.
Download the form
Next comes the download itself. The formats available are PDF, XFDL, and you decide between them by asking how you will enter the information. If you plan to type, take the fillable pdf: the boxes accept keyboard input and you can save the result. If you plan to write by hand, take the printable pdf and run it through your printer while it is still blank. Both show the same published page, so the decision affects your method and nothing else.
Then take care with how you open what you downloaded. Your browser will happily display a pdf, and for reading that is enough — but for typing it is not, because some in-browser viewers accept keystrokes and then throw them away when the tab closes. Put the file somewhere on disk, open it in a proper reader, type into one field and save, and confirm the text is still there when you reopen. If you picked up the xfdl copy, get the IBM Lotus Forms Viewer before you go any further, because nothing else will open the file.
Finally, note what the download costs you: nothing. You do not create an account, you do not enter an email address, and the file you receive is the published document with nothing added to it.
What the form asks for
- ContentArea1
- DATE_A
- DATE_AA
- DATE_AA_1
- DATE_AA_10
- DATE_AA_11
- DATE_AA_12
- DATE_AA_13
- DATE_AA_2
- DATE_AA_3
- DATE_AA_4
- DATE_AA_5
- DATE_AA_6
- DATE_AA_7
- DATE_AA_8
- DATE_AA_9
- DATE_A_1
- DATE_A_10
- DATE_A_11
- DATE_A_12
- DATE_A_13
- DATE_A_2
- DATE_A_3
- DATE_A_4
Now send it on. Follow the routing in the prescribing directive, which will point you to a named office, to your unit administrative channel, or to your own file. Take a copy before you release it. From there the record follows the retention schedule for the series, and neither you nor the receiving clerk shortens or extends that on local judgement.
When another document has to travel with this one, find it by series and number. Forms in the DA series sharing a proponent or a governing directive are commonly used in combination, and anything cited on the face of your form generally goes with it. Assemble continuation sheets, covers and transmittals before you send the package rather than in response to a query.
Check the edition date again the next time you reach for this form. Editions change when the proponent revises the content, and a copy you saved months ago may no longer be current — compare the date printed on your file against the edition in force before you type anything into it. What you do not need to do is redo work already finished: a form you completed and submitted under an earlier edition stays as it is.
Read this before you go. The file you download is a reproduction of a published Department of the Army document, offered as it was published. We are an independent site with no connection to the Department of the Army and no authority to issue anything, and we make no statement about whether your completed form will be accepted anywhere. Treat what you read here as information, not legal advice. Take real questions — about an entry, a requirement, or your eligibility — to G-4 or to your servicing administrative office.
Questions and answers
- What is DA Form 2408-14?
- UNCORRECTED FAULT RECORD
- Which edition is current?
- 08/01/2026
- Who is responsible for this form?
- G-4
- In which formats can it be downloaded?
- PDF, XFDL, PDF